Cleaning Ductless Mini-Split Systems
What You Need To Know About Cleaning Your
Napavine, WA Ductless Mini-Split System
Add Just A Few Steps To Your Routine Cleaning
To Ensure Your Ductless Mini-Split
System Continues To Deliver
Say goodbye to having to devote your entire day to cleaning out your ducts and HVAC system to ensure it runs smoothly, thanks to Napavine, WA ductless mini-split systems. One of the benefits that many homeowners find when they turn to these systems is how easy they are to maintain.
After all, we all live busy lives – who wants to take more time than necessary to clean?
While these ductless mini-split systems will not require the same amount of cleaning as a traditional HVAC system with ductwork, it is still important to keep them clean. After all, a dirty unit will become less efficient.
Two major components make up your ductless mini-split system: the indoor units found in various rooms and the outdoor unit. Let’s look at what you need to do to clean these parts efficiently.
Cleaning The Indoor Unit Of Your Ductless Mini-Split System
The indoor units throughout your Lewis County home will need to be regularly wiped down when in use. We suggest you clean the outside of the indoor unit with a damp cloth and remove any dust that may have accumulated while you dust the room.
Many people find that routinely dusting the unit ensures fewer deep cleanings are required than if they were to let dust accumulate on it. In addition to dusting the unit, you will want to clean the filter.
Unlike traditional HVAC units, these filters can be cleaned and reused. Locate the filter on your unit, then dip it into water and a mild detergent to remove dust and debris. If your filter is not that bad, you can often use air pressure to remove the dust and particles from it.
Reinstall the filter only when it is completely dry and ready to go back to work in the unit.
You need to deep clean your indoor unit once every few months. Start by turning off the power to the unit so there is no risk of shock or damage.
Then, remove the front panel so you can see the coils inside. Using a damp cloth, wipe the coils down gently to ensure they can still work as effectively as the day they were installed. If the coils are particularly dirty, you can use a coil cleaner. Dry them completely before the unit is turned back on.
The condensate pan may also need to be cleaned periodically. You should check for signs of mold or mildew and clean the pan with warm water and a cloth as needed. When mold is prevalent, use a small amount of bleach with the water.
Cleaning The Outdoor Unit Of Your
Ductless Mini-Split System
To clean the outdoor unit, you will need a water hose and a cleaning cloth. Start by removing any branches or twigs near the unit. Now is a good time to trim back any shrubs, bushes, or trees that could endanger it.
Take your water hose and gently spray down the outside unit. Use the cloth you have to remove any stubborn mildew or stains. If it has been a long time since you cleaned it, you may need a brush to clean the grills, as mildew and particles in the air can cause stubborn stains.
You may be able to remove the outside housing to access the outdoor unit even more. If that is the case with your system, you can use a vacuum to remove any debris that has fallen inside it and a damp cloth to remove any stains. Remember, this is not always possible, as it depends on the type of ductless mini-split system you have.
Lastly, be sure everything is dry before turning the unit on to heat or cool your home.
If you feel there are electrical issues at any point while cleaning your ductless mini-split system, do not attempt to fix them yourself. Instead, call a professional electrician to handle them.
Emerge Electrical is the go-to electrician in Napavine, WA for those ready to upgrade to a ductless mini-split system or when there are issues with the system. We offer free estimates, so call today at (360) 771-3869.